Brass Rain Barrel Spigot Quarter Turn Ball Valve Spigot with Bulkhead Fitting

Description

WADEO Brass Rain Barrel Spigot, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting
💧Two Installation Methods: Brass bulkhead fittings front mounting and back mounting.
💧Bulkhead fittings need 1 inch diameter holes to install.Fit up to 1.3 inch thickness wall.
💧Heavy Duty Solid Brass Bulkhead Fitting, 1-1/8 inch female threaded all the way, install spigot on either end. Heavy Duty 1-1/8 inch without kink quarter turn solid brass ball valve.
💧Tools Needed for Installation: Electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench.
💧Your Good Helper: We provide a thread seal tape and two washers (8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage.
How to Install
Step 1 : Drill a 1/8 inch hole.
Step 2 : Drop the fitting male piece inside.
Step 3 : Pick up the fitting from outside.
Step 4 : Tighten the nut.
Step 5 : Wrap with thread tape.
Step 6 : Tighten the faucet clockwise.
There are two ways to install it.