For Ford Powerstroke 6.0L&7.3L Fuel Oil Pressure Mechanical Gauge Test Tool Kit

Description

Description
100% Brand New, High Quality
The set is a tool, primarily designed to test fuel pressure while driving.
The tool can test fuel or low side oil pressure.
The set is essential to see the pressure drop with a load on the engine.
It comes with all the fittings needed for both 6.0 & 7.3 engines.
Professional Installation is Highly Recommended(No Instruction Included)​
Package Includes
Assembled pressure test hose and gauge set
Needed fittings/adapters
As the pictures show​​
Application Details:
GetFastShipping
Best store of motor parts
For Ford Powerstroke 6.0L&7.3L Fuel Oil Pressure Mechanical Gauge Test Tool Kit
Description
100% Brand New, High Quality
The set is a tool, primarily designed to test fuel pressure while driving.
The tool can test fuel or low side oil pressure.
The set is essential to see the pressure drop with a load on the engine.
It comes with all the fittings needed for both 6.0 & 7.3 engines.
Professional Installation is Highly Recommended(No Instruction Included)​
Package Includes
Assembled pressure test hose and gauge set
Needed fittings/adapters
As the pictures show​​
Application Details:
To test Fuel pressure on a 6.0, use an allen wrench removing the plug located at the bottom front of the fuel filter housing and then install the 1/4" jic x M12-1.5 adapter.
To test oil pressure on a 6.0, please remove the "single wire", oil pressure sensor, and utilize that port with the 1/4" jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo)
For 7.3 fuel pressure test, there's 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port. Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to reach) Then you would install the 1/4" jic x #4 orb adapter.
For 7.3 oil pressure test, you have 2 options. You can remove the "single wire", oil pressure sensor located on top front of engine, and then install the 1/4" jic x #4 orb adapter. Or, you can remove 1/8" npt plug located at the oil filter head and then install the 1/4" jic x 1/8" npt adapter.
This tool may probably work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool.
Item Specifics
Brand
Unbranded
Manufacturer Part Number
Does Not Apply
Features
Dual Scale Range, Gauge Hook
Accessories
Fittings, Hoses
Maximum PSI
100 PSI
Vehicle Type
Heavy Duty/Commercial, Passenger Vehicle
Warranty
Yes
UPC
Does not apply
Warranty
We accept a three-month warranty against manufacture defect.
Payment
We accept Ebay payment only.
All major credit cards are accepted through secure payment processor Ebay payment.
Payment must be received within 7 business days of auction closing.
If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
We accept a three-month warranty against manufacture defect.
Shipping
We usually ship within 1-3 business days(Monday- Friday), except some Chinese traditional holidays after receiving cleared payment.
The orders of Friday would be shiped in the next Monday.
We will ship our product from United States
, and it may takes about 3 to 10 business days to arrive your place.
Returns
We understand that sometimes you need to make a return or an exchange. For returns, simply send your order back within 30 days and you get your money back. All we ask is you send it back in the same condition it was received - new and un-used. In order to process a return or exchange, please send us a message through eBay and we will be happy to assist you immediately. Your satisfaction is our priority.
If you need any assistance, or just have questions, please do not hesitate to contact us. We are dedicated to providing you with all of the information you need to make a confident purchase, and we continue to support you after your purchase.
Customer Services
Our office hours are 8:00 a.m to 5:00 p.m (GMT +8) of Monday to Friday.
And our Office is closed on weekends and public holidays.
We apologize for the late reply during the holidays.
GetFastShipping
Best store of motor parts
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Hot Item
4 X 3" V-Band Flange&Clamp Kit Male/Female With Ridge Exhaust Downpipe Stainless
USD 49.79
2.5" Front Leveling lift kit For Chevy Silverado GMC Sierra GM 1500 07-17 Black
USD 17.56
4" Inch Turbo Exhause Down Pipe Stainless Steel V-Band Clamp with Flange #304
USD 22.10
2 X 2.5" V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes Stainless Steel
USD 27.76
3'' V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes STAINLESS STEEL
USD 18.75
New List Item
Intake Manifold Air Swirl Flap Runner Lever Kit for Mercedes M272 V6 M273 V8
USD 7.67
For 65-69 Ford Custom 390-428 6.4L 7.0L Full Length Performance Exhaust Header
USD 236.88
RV Generator Power Extension Wire Cord 10/4 Cable 30Amp Copper L14-30 25ft 7500W
USD 56.67
Exhaust Conversion Swap Header Manifold For LS1 LS2 LS3 LS6 LS7 Stainless Steel
USD 95.45
Universal 3" T-304 Stainless Steel Lap Joint Band Exhaust Pipe Tube Clamp
USD 13.56
For Ford Powerstroke 6.0L&7.3L Fuel Oil Pressure Mechanical Gauge Test Tool Kit
Description
100% Brand New, High Quality
The set is a tool, primarily designed to test fuel pressure while driving.
The tool can test fuel or low side oil pressure.
The set is essential to see the pressure drop with a load on the engine.
It comes with all the fittings needed for both 6.0 & 7.3 engines.
Professional Installation is Highly Recommended(No Instruction Included)​
Package Includes
Assembled pressure test hose and gauge set
Needed fittings/adapters
As the pictures show​​
Application Details:
To test Fuel pressure on a 6.0, use an allen wrench removing the plug located at the bottom front of the fuel filter housing and then install the 1/4" jic x M12-1.5 adapter.
To test oil pressure on a 6.0, please remove the "single wire", oil pressure sensor, and utilize that port with the 1/4" jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo)
For 7.3 fuel pressure test, there's 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port. Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to reach) Then you would install the 1/4" jic x #4 orb adapter.
For 7.3 oil pressure test, you have 2 options. You can remove the "single wire", oil pressure sensor located on top front of engine, and then install the 1/4" jic x #4 orb adapter. Or, you can remove 1/8" npt plug located at the oil filter head and then install the 1/4" jic x 1/8" npt adapter.
This tool may probably work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool.
Warranty
We accept a three-month warranty against manufacture defect.
Payment
We accept Ebay payment only.
All major credit cards are accepted through secure payment processor Ebay payment.
Payment must be received within 7 business days of auction closing.
If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
We accept a three-month warranty against manufacture defect.
Shipping
We usually ship within 1-3 business days(Monday- Friday), except some Chinese traditional holidays after receiving cleared payment.
The orders of Friday would be shiped in the next Monday.
We will ship our product from United States
, and it may takes about 3 to 10 business days to arrive your place.
Returns
We understand that sometimes you need to make a return or an exchange. For returns, simply send your order back within 30 days and you get your money back. All we ask is you send it back in the same condition it was received - new and un-used. In order to process a return or exchange, please send us a message through eBay and we will be happy to assist you immediately. Your satisfaction is our priority.
If you need any assistance, or just have questions, please do not hesitate to contact us. We are dedicated to providing you with all of the information you need to make a confident purchase, and we continue to support you after your purchase.
Customer Services
Our office hours are 8:00 a.m to 5:00 p.m (GMT +8) of Monday to Friday.
And our Office is closed on weekends and public holidays.
We apologize for the late reply during the holidays.